RD-250
POM resin body with straight-in, pistol-grip lever. Compatible with CRN250-BPN
safety nozzle.
CRN250-BPN
Removable safety by-pass nozzle complies with OSHA 1910.242 (B) and 1910.95 regulations.
When installed on blow gun models BG-50 and RD-250, it prevents the tip from building
pressure over 30 PSI. These models can be used with the tip for cleaning purposes provided
the air inlet pressure is regulated to 30 PSI or less.
CHR-250
Die-cast, zinc-plated body with lever operation. All brass internal parts. Safety tip to
comply with OSHA regulations included.
JOPLASTAR SERIES
ABS resin body with polypropylene, all-finger, pistol-grip lever and bottom port only.
Safety tip to comply with OSHA regulations included. Special tips are available on
request. A flow control device on the top of the gun allows for precise control over air
volume. (This blow gun replaces the TU/TD 10 and 20 series.)
| Part Number |
Pressure Limit (PSI) |
Temperature Limit (°F) |
Weight (Oz.) |
Port (NPT) |
| RD-250 |
120 |
32 to 175 |
2.8 |
1/4" |
| CRN-250 |
— |
— |
— |
— |
| CHR-250 |
150 |
32 to 175 |
4.2 |
1/4" |
| TD-30H |
225 |
0 to 122 |
3.5 |
1/4" |
|
